High-quality clothing only lasts a long time if it is properly cared for. That sounds obvious, but it isn't: Most garments are not ruined by wear and tear, but by improper care. Washed too hot, too often in the dryer, stored incorrectly. This guide explains what TENCEL™ and CastorTech need – and what they can never tolerate.

Why care is particularly important for these materials

TENCEL™ (Lyocell) and CastorTech are technically advanced materials with specific properties – and that is exactly why they react more sensitively to improper treatment than robust cotton or conventional polyester.

TENCEL™ is a cellulose fiber. It is naturally soft, drapes beautifully, and regulates moisture well. However, it is more sensitive when wet than when dry – that is the crucial point when washing. CastorTech, on the other hand, is significantly less sensitive: The castor-based fiber is mechanically robust, dirt-repellent, and more forgiving. Nevertheless, there are rules that significantly extend the longevity of both materials.

Washing TENCEL™: What you need to consider

The most important rule: delicate cycle, maximum 30 degrees. TENCEL™ cannot withstand high temperatures. Above 40 degrees, the fiber begins to shrink and loses its characteristic softness and beautiful drape.

TENCEL™ washing rules at a glance:

Temperature: 30 degrees, maximum 40 degrees
Program: delicate cycle or gentle cycle
Spin speed: maximum 600–800 rpm
Detergent: delicate detergent, no standard detergent
Fabric softener: not necessary, can stress the fiber over time
Dryer: not recommended

A common mistake: washing TENCEL™ items together with heavy denim or terry cloth. The mechanical friction caused by heavy items in the same wash cycle stresses the fiber and can lead to pilling over time. Wash delicate items together with similarly lightweight pieces.

Washing CastorTech: Significantly easier

CastorTech is more robust. The dirt-repellence of the castor-based fiber also means that you need to wash it less often than cotton. Liquids bead off more easily, and odors do not set in as readily.

CastorTech washing rules at a glance:

Temperature: 30–40 degrees
Program: delicate cycle is sufficient, normal cycle possible
Spin speed: up to 1000 rpm
Detergent: normal delicate detergent
Dryer: not recommended, but does not cause damage on a low setting
Ironing: not necessary

Anyone who regularly wears CastorTech trousers will find that airing them overnight is often sufficient. This protects the material while simultaneously reducing resource consumption.

Drying: The underestimated step

Neither TENCEL™ nor CastorTech should go in the dryer. Both materials react to dryer temperatures by shrinking or changing their fiber structure. This can be repaired if it happens once – but repeated dryer cycles significantly shorten the lifespan of the garment.

The correct method: Hang to dry, not in the sun. Direct sunlight bleaches colors, especially dark tones. For TENCEL™, additionally: gently pull the garment into shape before it dries. When wet, TENCEL™ can be shaped well; when dry, it can hardly be shaped at all.

Simply hang up CastorTech trousers – they return to their original shape on their own after drying. No ironing, no rework.

Ironing: Almost always unnecessary

TENCEL™ can wrinkle easily if it is left crumpled or washed at too high a spin speed. This can be remedied with a steam iron on the lowest setting – never iron dry, never at a high temperature.

CastorTech generally does not need ironing. This is one of the practical advantages of the material: The fiber smooths itself as it dries. Anyone who hangs up their CastorTech trousers in the evening instead of folding them will find them wrinkle-free the next morning.

Storage: What most people do wrong

Clothing that is folded together and stacked develops pressure wrinkles over time, which sometimes do not fully release even after washing. Especially with TENCEL™, hanging it in the wardrobe is worth it.

CastorTech trousers can be stored folded without any problems because the fiber withstands pressure well. Nevertheless: Hanging them up preserves their shape better.

What both materials do not like: damp storage. Anyone who stores clothing in poorly ventilated closets or bags risks mold formation, which irreparably damages the material. Always make sure that clothing is completely dry before putting it away.

Comparison: TENCEL™ vs. CastorTech in care

Care step TENCEL™ CastorTech
Washing 30 degrees, delicate cycle 30–40 degrees, delicate cycle
Spin speed Max. 600–800 rpm Up to 1000 rpm
Dryer Not recommended Not recommended, tolerates low setting
Drying Hanging, pull into shape Hanging, returns to shape on its own
Ironing Steam, low setting, if necessary Not necessary
Washing frequency As needed Rarely necessary, airing is often sufficient
Storage Preferably hung up Folded or hung up
TENCEL™ requires a little more attention when washing and drying, but rewards this with exceptional softness and a beautiful drape for years. CastorTech is easier to care for, more dirt-repellent, and more forgiving – trousers you hang up in the evening and put on again effortlessly in the morning. Anyone who treats both materials correctly will have clothing that does not need to be replaced after two seasons.

More on the topic

BREDDY'S – Clothing that lasts

TENCEL™ T-shirts and hoodies, CastorTech trousers for men and women. Developed in Vienna, made in Europe, made for everyday life.

To the men's collection →    To the women's collection →
Author: Manuela Bretschneider  ·  Co-founder & Product Developer, BREDDY'S Vienna
— Claus Bretschneider